Engineering Plastics Grade Nylon 66 Resin Fiber Greade Nylon 66 Resin Property Specifications of the Modified Nylon 66 Resin
Description
Units Test standar
Condition
Product
FYR27T03 FYR25BCL FYR25T03CL FYR25T15CL FYR26H FYR27 FYR27B
Physical&chemical properties
       
Relative viscosity
  QB dissolution
2.67±0.03 2.55±0.03 2.55±0.03 2.55±0.03 2.60±0.03 2.70±0.03 2.75±0.05
-NH2 Meq/Kg QB dissolution
48±5 45±4 45±4 -- 65±4 50±4 "50±5
Tio2 % QB  
0.3±0.02 -- 0.3±0.02 1.7±0.1 -- -- --
Black specks % QB dry
≤0.017 ≤0.017 0.017 0.017 0.017 0.017 0.017
Water Content
ppm GB dry
-- -- -- -- 900 900 900
Mechanical properties
       
Tensile strength MPa ISO527 dry
70.27 73.75 68.5 70.0 75.4 76.4 77.9
Tensile modulus GPa ISO527 dry
2.36 2.51 2.3 2.5 2.5 2.5 2.5
Elongation,at bread
% ISO527 dry
32.7 25.55 22.4 23.3 37.4 32.8 23.7
Flexural strength MPa ISO178 dry
57.63 68.72 56.0 76.6 77.2 74.0 73.6
Flexural modulus GPa ISO178 dry
1.26 1.57 1.2 1.8 1.6 1.6 1.2
Charpy impact strenth KJ/m2 ISO179 dry
unbroken unbroken unbroken unbroken unbroken unbroken unbroken
Charpy notched impact strength KJ/m2 ISO179 dry
7.9 8.5 5.7 8.2 8.1 8.2 9.3
Izod notched impact strength KJ/m2 ISO180 dry
6.3 4.7 5.4 5.4 5.7 7.0 5.1
Thermal properties        
Melt Flow rate g/10min ISO1133 dry
11.0 16.1 12.9 12.8 11.6 11.0 10.9
Melting Range
ISO3146 dry
253-260 149-256 246-255 245-252 250-257 248-256 254-261
Heat deflection temperature ISO75 1.80Mpa
80.93 77.9 91.4 70.3 72.32 81.6 74.9
Coefficient of linear expansion 10-5K ASTMD696 dry
7.5 7.0 7.0 7.5 7.5 7.5 7.5
Electrical properties        
Volume resistivity Ω•cm IEC93 dry/wet
1015/1012 1015/1012 1015/1012 1015/1012 1015/1012 1015/1012 1015/1012
Dielectric strength Kv/mm IEC243 dry
21 21 21 21 21 21 20
Flammability   UL94 dry
V-2 V-2 V-2 V-2 V-2 V-2 V-2
NOTE:Above data is just of typical and only for type selection reference.
HOME ABOUT US PRODUCT ORDER SERVICE CONTACT
Copyright©2004,SHENMA ENGINEERING PLASTICS Co.,Ltd.All Rights Reserved